Instructions for use and maintenance
Ceramic Glass Cooktop
1.
Induction hotplate front left
2.
Induction hotplate rear left
3.
Induction hotplate rear right
4.
Induction hotplate front right
5.
Cooktop control panel
Cooktop control elements
A.
ON/OFF sensor
A
1.
ON/OFF indicator LED
B
. Slide control sensor
B
1
.
Slide control indicator LED’s
C
. Extra strong power setting ON/OFF sensor
D.
Pause setting ON/OFF sensor
D
1
.
Pause indicator LED
E
. Hotplate selection/power or remaining heat displays
E
1.
Decimal dot on the power displays:
On
: hotplate power control is possible
Off
: hotplate power control is not possible
F
. Timer ON/OFF sensor
F
1
.
LED indication cooking zone on which the timer is active:
Flashing:
time setting is possible
Fixed:
time setting is not possible
Off
Medium power
Full power
Cooktop control
1.
After turning the ceramic glass cooktop on, all displays come on for a moment. The cooktop is ready for
operation.
2.
The cooktop is fitted with electronic sensors which are switched on if you touch the relevant circle for at least one
second.
3.
Each sensor activation is followed by a sound signal.
4.
Avoid placing any objects on sensor surface (possible error signalization).
5.
Always keep the sensor surface clean.
Activating the cooktop
Touch the ON/OFF sensor (A) for at least one second. The hob is now active, and all hotplate power indicators (E)
indicate »0«, decimal dot (E
1
) is flashing and the timer display shows "CL" .
Now you need to select the next setting within 20 seconds, otherwise the cooktop switches off again.
