Pre-Installation -
continued
Pre-Installation
o
Care and attention should always be taken when cooking with oils, alcohol, etc which give off flammable
vapours.
o
Pre-used oil is especially dangerous in this respect. Do not use uncovered electrical grill.
o
To avoid possible risks of fire always comply with the maintenance instruction below.
Attention
This appliance must be earthed electrical connection, check that the socket has an earth connection and that the
voltage values correspond to those indicated on the rating plate inside the appliance. The power socket connection
is to be easily accessible after installation. When making the electrical connection, check that the socket has an
earth connection and that the voltage values correspond to those indicated on the rating plate inside the appliance.
The power socket connection is to be easily accessible after installation.
(Please read in conjunction with following diagrams)
The unit is designed for 2.4 to 2.7 metre high ceiling. The decorative chimney cover is telescopic and is designed for
550 to 850mm adjustment.
Note:
Ducting accessories are not supplied. Please refer to the optional ducting kits. The air outlet from the motor
requires 125mm round ducting which requires 135mm diameter round hole in the ceiling. This hole will be covered by
the decorative chimney. Care should be taken to align canopy with decorative chimney allowing sufficient clearance
to accommodate the ducting.
Before starting assembly, read the instructions carefully and remove the filters from canopy to allow access to wall
mounting holes. To remove the filters, pull the relative catch and tilting it downwards until it disengages from the
supports.
Reverse these instructions when refitting the filters.
Note:
Stainless steel is very easily damaged during installation if abraded or knocked by tools.
Please read the entire instructions before installing the rangehood
Installation
