Operating Instructions
General Maintenance
Parts and Accessories list
Ducted
o
Please use manufacturer product code: 1687
o
Extra lengths or bends may be required depending on the length required & whether there is any
structural material in the run, eg rafters.
o
For optimal efficiency, use smooth ducting for reduced noise and increased airflow. Flexible ducting
should only be used as a last resort.
Recirculated
Use Manufacturer Product code:
o
1746 (for 600mm unit)
o
1747 (for 900mm unit)
For other accessories, parts or service, please contact your local supplier or approved service agent.
Switch off rangehood before cleaning or maintenance.
To prevent surface damage never use abrasive or oil
based liquid cleaners. To clean the surfaces of the appliance, use mild detergent and warm water. In areas of
high humidity and coastal environments cleaning should be carried out frequently.
Warning:
a build up of oil may occur if the rangehood is not cleaned regularly.
Filter Maintenance
To maintain efficient, the filter should be removed regularly (approximately monthly), and washed using hot
soapy water or the dishwasher.
Note:
Some discolouration of the frame may occur if washed in the dishwasher.
Light Replacement
1. Disconnect the Rangehood from power supply.
2. Insert small screwdriver or slim knife as shown, ease catch to side and slip
out the diffuser.
3. Replace candle lamp (40 watt max).
4. Slide diffuser back into aperture and ‘click’ into place.