3
Installation Instructions
REVERSING THE DOOR
You can choose to open your refrigerator by the right side or the left side. To change the way of opening, please
follow the instructions below.
Important safety warning: Before doing so please unplug and disconnect the appliance.
In addition to the accessories packed, you will need:
•
Medium-sized cross screwdriver
•
Small screwdriver
1.
First, check to make sure the power is disconnected.
2.
Open the door.
3.
Remove the protective cover with a Philips screwdriver from the backside. After that remove the 3 shelf-tapping
screws and save them.
4.
Push the top hinge forward, remove the door and keep it aside.
5.
Remove the cover over the screw holes on the left side of refrigerator housing. Attach cover on the right side.
Cover is force-fitted.
6.
Push the machine slightly backward against the wall. Disassemble the 2 fixed hinges as shown in the below
picture. Then Disassemble the bottom hinge and assemble it on the other side. After that, assemble the stands.
7.
Exchange the 2 bolts and fix them on the other side.