7
Care and Maintenance
MAINTENANCE
The appliance should be maintained and cleaned frequently. For your safety, please pull the plug out of the socket
before the cleaning.
Interior maintenance: Clean the interior of the appliance with clean water or neutral abluent. Scour it with clean
water and wipe it with a piece of dry cloth.
Maintenance of door gasket: It is easy to get damaged if the door gaskets are polluted by the stain like oil, sauce
and etc. so clean it with care.
Outer maintenance: Wipe the dust with a piece of dry cloth, clean it with neutral abluent of necessary.
Lighting and its replacement: When the refrigerating chamber door opens, the LED light turns on. When the light
is damaged, please remove the lampshade first and then replace the LED light.
The specific operations are shown in the following diagram:
1-
Please move the lampshade and the thermostat out 3-5mm in the direction of the arrow.
2-
Take out the lampshade and thermostat downwards.
3-
Pull the connection terminal, use the screwdriver to remove the LED light board and replace it.
Note
If the LED lamp is abnormal, it should be replaced by professionals. Do not dismantle and
replace it privately in order to avoid damage
DEFROST
Defrosting of refrigerator will be executed automatically while the product is operating, so it is not required for
manual defrost. The defrost water flows into the vaporization plate and will be vaporized by the heat of compressor.
so, its drain tube must be cleaned.
Warning Do not use mechanical devices or other means to accelerate the defrosting process,
other than those recommended by the manufacturer