6
Operating Instructions
Once plugged into the power supply and turned on, adjust the thermostat control to coldest and allow the appliance
to run for 2-3 hours before placing any food inside.
1-
Leave some space between items inside for air circulation.
2-
Food should be kept in sealed package to prevent drying or odour.
3-
Hot food should be cooled down before placing into the appliance. Otherwise, interior temperature and electronic
consumption will increase.
4-
Reducing the frequency of door opening can lower the electronic consumption.
Control Panel
1-
When the door is opened, LED display will be lit. Press“
” for 3 seconds, the light of “
” will be off, child lock
unlocks. After the child lock is unlock, temperature can be adjusted and the mode can be switched; Stay still for
10S, “ ” light will be turned on, the child lock will be activated again.
2-
After the child lock is unlock, Press“
”for 3 seconds, temperature display unit can be switched to Celsius or
Fahrenheit, light of“ ”will be turned on according to the operation done mentioned earlier.
3-
After the child lock is unlock, temperature can be adjusted by pressing “
” In the freezer mode, temperature
adjusted ranges are from -22°C to -15°C(-8°F-5°F). In the fridge mode, temperature adjusted ranges are from
1°C to 7°C (33°F~45°F).
4-
After the child lock is unlock, fridge mode or freezer mode can be switched by pressing“
”. The indicator light
will turn on showing that which mode is selected.
5-
After the child lock is unlock, quick cooling function is applied when“
” is pressed, Quick Cooling function
indicator light“
” will turn on; Press“
” again, quick cooling mode can be exited manually. Note that Quick
Cooling function can be only selected in the freezer mode and it cannot be selected in the fridge mode. In the
Quick Cooling mode, the inner temperature can reach as low as -30°C(-22°F). Quick Cooling mode will turn off
automatically when it is on for 24 hours continually.