6
Installation
A
Minimum
height from the hob surface to the underside face of the rangehood (wall or cabinet mounting)
600mm
electric hob
650mm
gas hob
Note: If the instructions for the gas hob specify a greater distance, this has to be taken into account.
Mounting to underside of cabinetry
Fix the rangehood to a shelf mounted at the correct height in the wall unit, by drilling four holes (see diagram
below) and fixing with the four screws supplied (found in the bag labelled “
TOP FIXING
”). Double check the
dimensions with the rangehood before the holes are drilled, especially the dimension from the
front of the
cupboard door
to the first holes (60mm)
PLEASE NOTE:
Using the incorrect screws for the installed mounting method may cause damage to the product.
This damage may lead to failure of the top mounting anchor points and this would not be covered by the
warranty.
The sides, top, front and rear of the product (excluding the handle) should not be accessible during normal
operation after installation. This unit is designed to be hidden or inbuilt into the kitchen cabinetry.
A
