5
Operating Instructions
Controls
Low Speed
Medium
Speed
High Speed Light On / Off
Timer
Power
Once the appliance is connected to the power source, the backlight of the control panel will turn on for 5 seconds, and
then turn off, leaving the appliance in stand‐by mode. Pressing a control button will light up an indicator light while the
function is active, and then turn off when the function is deactivated.
Lights
The light can be operated independently from the fan. Press the fan button once and the LED lights will turn on. Press a
second time and they will turn off.
Fan speed
The exhaust fan is operated by the three fan speed buttons. Pressing the button once will turn on the fan (low, medium
and high speeds) and pressing a second time will turn the fan off.
Timer
When the exhaust fan is in use, pressing the Timer button will set up a 5 minute delay, after which the appliance will
return to stand‐by mode.
NOTE
: if the lights are on, these will turn off as well, but the function will not work if only the lights are on.
Removal of Aluminium Filters
To remove the aluminium filters, first unclip the centre section of the bottom panel and let it swing down. Push in the
latch at the handle (see diagrams) and remove. To install, repeat the operation in reverse.
