5
Operating Instructions
Controls
There are five touch buttons:
(Timer),
(Decrease),
(Power),
(Increase),
(Lamp).
1.
Power on:
After you have connected the cooker hood to the mains supply, all the outputs will close, all
indicator lights of the buttons will lit on, and the cooker hood will enter to standby state.
2.
Power Button:
Press power button once, indicator lights of function keys(increase, decrease, timer and lamp)
will be lit on, LED display will show “0” and the hood will enter operation mode. Press power button again, all
indicator lights of function keys will be off, and all function operation for the hood will close. The hood enters
into standby mode. The above steps can be operated repeatedly.
After enter operation mode, if without any function operation within 2 minutes, indicator lights of the function
keys(increase, decrease, timer and lamp) and LED display will extinguish.
3.
Lamp Button:
Press lamp button once, the backlight of button and the hood light will be on. Press again, the
light will be off. The indicator light of the button will change to backlight mode and run circularly.
4.
Increase Button:
The hood has 3 speed settings (Low, medium and high)
Press Increase button once, the indicator light of button will be on, the cooker hood starts to work at low
speed. The LED display will show “1”.
Press Increase button again when it is working at the low speed, the cooker hood works at mid speed and the
LED display will show “2”.
Press Increase button again when it is working at the mid speed, the cooker hood works at high speed and the
LED display will show “3”.
When the cooker hood works at high speed, press increase button again, the hood will keep working at high
speed.
5.
Decrease button:
By pressing this button, the cooker hood will decrease one speed, and the display will show
the current working speed, the indicator light of the decrease button will on . If this button is pressed when
hood is working at the low speed, the LED display will show “0”, the cooker hood will turn off and the indicator
light of the decrease button will change to backlight status.
6.
Timer button:
The timer button works when the hood is working only (Pressing the key will be invalid when
the hood is under standby mode or open the lamp separately). The timer setting is 5mins and could be repeat
setting. When the time is up, the cooker hood will turn off and the light will be off.
When the timer is set, if adjusting the speeds, the timer function will be cancelled.
