2
Overview
view
Pre-installation
Thank you for purchasing a quality Robinhood rangehood. Robinhood has a high standard of quality control
and every rangehood is tested and approved before it leaves the factory.
Important:
o
Please read the entire instructions before installing the rangehood.
o
Always switch power off prior to installation.
o
Stainless steel is very easily damaged during installation if abraded or knocked by tools. Protect the
rangehood with the cardboard box or plastic bag during installation.
o
All electrical work must be done in accordance with local and national electrical codes as applicable.
o
For safety, this product must be earthed.
o
A power outlet should be within 1500mm of the power cord exit from the rangehood.
o
The power socket must be accessible and enable the end user to isolate the rangehood from the power for
the purpose of internal cleaning or maintenance.
o
All ducting accessories are not supplied and all ducting must comply with local requirements and building
codes.
o
See Ducting options next page.
Contents of packaging:
o
1 x Tilterhood rangehood
o
1 x Installation and Operating Instructions
o
1 x packet of fasteners and wall plugs
`
Typical equipment required:
o
electric drill
o
screwdriver
o
tape measure
o
spirit level
o
duct tape
(if ducting)
o
jig saw
(if ducting)
o
ladder
(if ducting)
o
All dimensions in mm
o
Actual width of unit is 598mm
o
Model may vary slightly from images pictured
o
Ducting outlet suitable for 125mm Ducting
