6
Operating instructions
Before operating the hood, make sure that it has been installed by a suitably qualified person, as per the
information contained in installation instructions.
Controls
LOW SPEED MID SPEED HIGH SPEED LIGHTS ON/OFF TIMER
Power
Once the appliance is connected to the power source, the backlight of the control panel will turn on for 5 seconds,
and then turn off, leaving the appliance in stand-by mode. Pressing a control button will light up an indicator light
while the function is active, and then turn off when the function is deactivated.
Lights
The light can be operated independently from the fan. Press the fan button once and the LED lights will turn on.
Press a second time and they will turn off.
Fan speed
The exhaust fan is operated by the three fan speed buttons. Pressing the button once will turn on the fan (low, medium and
high speeds) and pressing a second time will turn the fan off.
Timer
When the exhaust fan is in use, pressing the Timer button will set up a 5 minute delay, after which the appliance will return to
stand-by mode. NOTE: if the lights are on, these will turn off as well, but the function will not work if only the lights are on.
To remove the filter, pull down the front panel & let it hang down. Press in the handle of the filter to release
the fixing tabs and rotate the filter down. Pull the filter out.
To replace the filter, fit in the opposite order as above.
