4
Dishwasher Connection (Optional)
If you plan on connecting your dishwasher drain pipe to your waste disposal, remove the plug in the
dishwasher drain connection opening with the help of a screwdriver and a rubber mallet. Remove the plastic
plug from the inside of the disposer by holding the disposer upside down and allowing the plastic plug to fall
out. Ensure all parts are removed.
The dishwasher drain outlet on your Robinhood waste disposal will accept a 22mm drain hose. Fasten the
connection tube in place with a hose clamp.
Mounting the Disposer
1.
The rubber splash baffle should be attached to the main body of the waste disposal and not the sink
flange. Using two hands push the main body upwards so that the inner groove of the splash baffle locks
onto the sink flange. If necessary use cooking oil or similar products to lubricate the inner rim on the
exposed side of the splash baffle. Once engaged the disposer will hang freely by itself.
2.
Align unit so the waste outlet is able to be connected to the house plumbing.
3.
Place the hinged clamp around the splash baffle and lock in place.
4.
The appliance must be installed so that the reset button located under the unit is readily accessible.
