4
Installation - Exhaust
Fix the one-way valve to the air outlet of the rangehood, and then attach the exhaust pipe to the one-way valve.
Chimney Installation
Put the inner chimney piece inside the outer chimney. Slide the inner chimney up to the desired height. Fix it into
place on plate I with two 4x8mm screws, as below.
Drill two 8mm holes to accommodate plate II. Screw and tighten plate II to the wall with two 4x30mm screws.
Assemble the chimney onto the rangehood and fix the base with two 4x8mm screws. Fix the inner chimney with two
4x8mm screws.