22
Cleaning and Maintenance
Do not wash your detergent drawer in dishwasher.
Fluid detergent level plate (*)
Remove the fluid detergent level plate for cleaning and maintenance purposes, as shown and wash off any detergent
residue. Slide the fluid detergent level plate back into the guides. Make sure that there is no remaining detergent
residue.
(*) Specifications may vary depending on the product purchased.
Pump Filter
The pump filter system in your Washer Dryer prolongs the life of the pump by preventing lint from entering your
machine. We recommend that you clean the pump filter every 2 months.
The pump filter is located behind the cover on the front-lower right corner.
To clean the pump filter:
1.
You may use the washing powder spade (*) supplied with your machine or liquid detergent level plate to open
the pump cover.
2.
Lodge the end of the powder spade or liquid detergent level plate in the opening of the cover and gently press
backwards. The cover will open.
3.
Pull the black rubber hose forward and detach it from its clamp, place a container under it and remove the
plug from the hose.
4.
Collect the water drained from your machine in a container.
NOTE:
Depending on the amount of water inside the machine, you may have to empty the water collection
container a few times.
•
Once the water has fully drained, fit the plug back on the hose.
•
Fit the hose back into the clamp.
5.
Loosen the filter cover by turning it anticlockwise and remove by pulling.
6.
Remove any foreign materials from the filter with a soft brush.
7.
After cleaning the filter replace the filter cover and tighten by turning clockwise. Please note that the filter
cover may leak water unless re-fitted properly.
8.
Close the filter cover. When closing the pump cover, ensure that the mountings inside the cover meet the
holes on the front panel of the machine.
