6
Installation Instructions
Your machine must only be installed by an authorized service company.
REMOVE THE TRANSIT SCREWS
1.
Before operating your machine, you must remove the transit screws from the rear of the machine.
2.
Loosen the transit screws by rotating anti-clockwise with an appropriate spanner.
3.
The transit screws can then be removed with a straight pull. The removed transit screws should be stored in case you
need to transport your Washer Dryer in the future.
NOTE: You must remove the transit screws from your machine before first use. Faults occurring in machines
operated with transit screws still fitted are outside the scope of the warranty. Fit the plastic blanking caps supplied in
the accessories bag into the gaps left by the removal of the transport screws. The transport screws should be stored for
future use.
4.
Insert the plastic blanking caps from the accessories bag into the gaps left by the transit screws.