6
Robinsons shelf / staging
If you wish your shelf / staging to go right up to the front of a partition then a D2056/G/I/W is required so that you can drill
and mount the brackets and bracings, see below. Prior to adjoining the shelf / staging the D2056 needs to be drilled and
mounted between the gutter and the cill, it will also need to be cut to length on the dwarf wall models.
It is also necessary to reduce the length of the aluminium slats so that they do not interfere with the partition glazing
(best to use a set-square and hacksaw). This is not an issue to the rear of the partition as there is a bolt slot present to
allow for attachment.
D2056
