18
GB
ELECTRICAL CONNECTION
• Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm.
Chimney assembly
Upper chimney section
• Slightly widen the two sides of the upper
chimney and hook them behind the brackets
7.2.1, making sure that they are properly housed.
• Secure the sides to the brackets using the 4
screws 12e (2,9 x 9,5) supplied.
Lower chimney section
• Slightly widen the two sides of the section and
hook them between the upper section and the
wall, making sure that they are properly housed.
• Fix the sides of the bottom section to the hood
body using the 2 screws 12e (2,9 x 9,5) supplied.
• When installing the recirculation version, fit the
directional grills 8a – 8b in their housings so that
the directional symbols are at the top and towards
the front of the hood. Ensure that they are inserted
correctly in the outlet connection piece 15
1
12e
7.2.1
2
2.1
2.2
8b
8a
