81
Chapter 3. Operating RoboBuilder
Modifying Robot File(example, HUNO)
To modify an existing motion file, follow the instructions below:
01
Set ComPort and BaudRate, and click OpenPort(
). If the connection between PC and
RoboBuilder is normal, the button changed to ClosePort(
).
02
Select [Open] on the menu bar. Select the desired project in the [Open Project] window and
click [Open]. (e.g. HunoBasic.prj)
03
The settings of the wCK modules appear in the [Robot Configuration] window. At the same time,
the first motion file that is saved in the project opens.
In case of HunoBasic.prj, the
HunoBasic_PunchLeft motion opens.
In order to modify a motion file that
you downloaded from Internet, add the
motion file to a desired project first.
Summary of Contents for DIY Robot kit
