1. Introduction
Joypad Remote Controller Board can control RoboBuilder by wireless, which is using Joypad for Games.
2. Part List
① Joypad Remote Controller Board 1 EA
② Bluetooth Module 2 EA
③ Battery Holder 1 EA
④ Screw for fixing board 2 EA
⑤ Nut for fixing battery holder 2 EA
⑥ Bolt for fixing battery holder 2 EA
⑦ two Sockets for the installation of item ②
※ NOTE :
1. Joypad is not included in Part List. Original Sony Playstation 2 Joypad is strongly recommended.
Some other Joypad works, however, we do not gurantee with other Joypad.
2. RoboBuilder does not take any responsibility of physical injuries or damages during assembling.
3. Installation
① Required parts
SONY PlayStation 2 Joypad 1 EA
AAA Battery 4 EA
Bluetooth Kit (RBX-BLTOOTHCOM) 1 EA
② Unscrew the bolt as shown in the below, then fix Joypad Remote Controller Board by using 2 screws for fixing board
Joypad Remote Controller KIT (RBX-BTCONT-01) Manual
August 20th, 2008, RoboBuilder co., Ltd.
①
②
③
④
⑤
⑥
⑦