⑥ Solder each Joypad line onto the board as shown in the below.
⑦ Insert Battery (Battery is not provided.) into Battery holder, then connect to the board.
You can check the red LED lights after power on. Green LED lights whenever Joypad buttons
are pressed.
※ Unlike the above picture, "×", "○", "△" button is used for combination key, green LED
does not light.
※ If Joypad LED(green) does not light, please check out the followings.
1) Check out PIN No. and Color.
2) Check out Soldering whether it was soldered properly.
⑧ Fix the line and board by using glue-gun, if the operation works properly.
1
9
