13
EN
Space Isolator:
Space Isolator Display and Control Panel:
Overall Display
Function Instructions
Toggle switch
Turn off
Low range
Middle range
High range
Function Introduction of Space Isolator:
Space Isolator, an accessory of the cleaner, can block area by sending special infrared signal so as to
prevent the Cleaner from entering some unnecessary areas.
No
Name
Function Information
1
Toggle switch
You can switch the function by sliding repeatedly
a
Turn off
Turn off
b
Low distance
Low range ~ 3m
c
Middle distance
Middle range ~ 5m
d
High distance
High range ~ 7m
2
Infrared wall transmitting
signal head Isolator
Slide , then you can adjust the distance of the Space
3
Near-infrared transmitting
head
The near-infrared transmitting signal makes the Cleaner run outside
the Space Isolator scope of 50-100cm without any impact to it.
4
Power LED
The Power LED will flicker once space isolator is on.
1.
Open the battery cover before using, place 2x”AA” batteries (not included) into the box
correctly. Pay attention to the polarity or the Space Isolator will not work.
2.
The battery consumption duration is related to the selected transmitting distance
and working duration, please select proper transmitting distance and low
transmitting power to save the battery, so don’t forget to turn off the toggle
switch while unused.
3.
There will be some difference in the direction, transmitting infrared signal of the Space Isolator
and receiving distance of the Cleaner due to environmental impact and movement of the
Cleaner during the actual using. The difference above may vary based on the actual
environment and different battery power of the Cleaner and Space Isolator
