COTTON CANDY MACHINE ACB-09E
REVISED 28-Sep-17
11
This ‘sleeve’ can be wrapped around a stick, making an uniform serving of
cotton candy.
‘Cold start’ mode
Warming up of spinning head in the beginning of after long pause (15-20
minutes) takes not less than 60 seconds on common RoboJetFloss and not
less
than 20 seconds on ‘Pro’ version of the machine. Once the head is
warmed, cotton candy starts to come out. This is so-
called ‘cold start’
mode. Later on, cotton candy will come out faster, since the heater is
already hot and melt sugar quickly.
To reduce ‘cold start’ time, on ‘Pro’ version one should press ‘Quick start’
button (15) and keep it pressed for about 10 seconds. It can be done either
with the motor switched on or switched off.
While the button is pressed, maximal voltage is being supplied at the
heater, thus reducing ‘cold start’ time.
However, one should not keep pressed
‘Quick start’ button (15) for too long
time, since it will lead to spinning head overheating. As a result, cotton
candy would come out not as a wide stable ‘sleeve’, which is easy to wind
on the stick, but as a narrow ‘rope’, which can only be wrapped onto a stick
