17
62.5%-75%
50%-62.5%
37.5%-50%
25%-37.5%
12.5%-25%
0%-12.5%
= 0%
4.3
Battery Charging
Be sure to fully charge the smart battery before using it for the first time.
1.
Connect the charger to an AC power supply (100-240V, 50/60 Hz; use a power adapter if necessary).
2.
When the battery is on or off, connect it to the charger. If the current capacity is greater than 95%, you must switch on
the battery before it can be charged.
3.
During charging, the capacity indicator flashes and indicates the current capacity.
4.
When the capacity indicator turns off, the battery is fully charged. In this case, disconnect the battery from the charger
to finish charging.
Use the RoboMaster designated special charger as the standard charger.
The battery temperature becomes high after a period of use. In this case, you must wait for the battery to
drop to room temperature before charging it.
The optimal charging temperature range for the battery is 0°C to 40°C. If the battery cell temperature is
beyond this range, the battery management system will disable charging.
4.4
Charging Protection Indicator
The battery LED indicator can display battery protection notifications triggered by abnormal charging conditions.
