©
2020 DJI All Rights Reserved.
23
4. Click the "VTM Activation" page on the left side of the software tool to display the VTM activation
interface, where you can click the "VTM Receiver Activation" button to display the VTM Receiver
Activation window.
5. In the VTM Receiver Activation window, select the corresponding serial port number and click Open.
Please re-check your activation region and then click the "Activate" button.
6. If activation fails, please check the connection and network status of the VTM, and then repeat the
activation operation in step 5.
7. After activation, check whether your activation region matches your mode: Mode 1 for Mainland
China and other regions, and Mode 2 for Japan. Once completed, activation cannot be repeated
again.
VTM Channel Configuration
Each Robot ID is bound with a VTM channel ID. Their correspondence is shown in the table below:
Mainland China and other regions:
Robot ID
VTM Channel ID
Red 1
1
Red 2
2
Red 3
3
Red 4
4
Red 5
5
Red Aerial (corresponding to the VTM Transmitter ID of the red team's Aerial)
6
Blue 1
6
Blue 2
5
Blue 3
4
Blue 4
3
Blue 5
2
Blue Aerial (corresponding to the VTM Transmitter ID of the blue team's Aerial)
1
[1]
[2]
