2.1 Zones setup
The
‘
Zones setup’
menu allows user to set the
parameters that are specific per zone
.
It is possible to set up to three different zones: zone Base, zone A and B, when the main zone is
Base Zone
, the area where the Base Station is located (for multi zones setup refer to paragraph
1.2.2).
2.1.1 Set Zone: Base
Enables to set all the parameters that are specific to Zone Base (paragraphs 2.1.1.1 to 2.1.1.6).
2.1.1.1 Weekly program
The ‘
Weekly program’
menu consists of four options (figure 2.2):
a. Update program – allows updating the program and changing the settings.
b. Program type – allows setting the program type, when every type gives a different level of
the parameter the user can set (more details will follow).
c. Program on/off - Allows user to shut off the weekly program when setting the ‘
Program
’ to
‘off’
.
Set Zone: Base
Set Zone: A
Set Zone: B
Weekly program
Entry points
Skip next start
Islands on/off
Work time
External Base
Update program
Program type
Program on/off
Display program
2.1.1
2.1.2
2.1.1.1
2.1.1.2
2.1.1.3
2.1.1.4
2.1.1.5
2.1.1.6
Set Zone: Base
Set Zone: A
Set Zone: B
Weekly program
Entry points
Skip next start
Islands on/off
Work time
External Base
Update program
Program type
Program on/off
Display program
2.1.1
2.1.2
2.1.1.1
2.1.1.2
2.1.1.3
2.1.1.4
2.1.1.5
2.1.1.6
Figure 2.2
Weekly program menu
d. Display program - the weekly program display is used to show the active days and additional
information about the last week operations (more details will follow).
Program type
There are three types of weekly programs that can be set by the user:
Figure 2.3
Weekly program set by area
Set by area
Set by days
Advanced
Base zone area
Press GO
100 – 150 m²
Confirm
200 – 250 m²
Confirm
Start: 13:00
Next digit
Start: 14:00
Confirm
Press ‘
GO
’
GO
’
GO
’ t
to confirm
Scroll ‘UP’ to choose the
lawn area connected to
the Base Station
Press ‘
Scroll to set the start time
and press ‘
o confirm
(the ‘Start time’ is the
same for all days)
Set by area
Set by days
Advanced
Base zone area
Press GO
100 – 150 m²
Confirm
200 – 250 m²
Confirm
Start: 13:00
Next digit
Start: 14:00
Confirm
Press ‘
to confirm
Scroll ‘UP’ to choose the
lawn area connected to
the Base Station
Press ‘
Scroll to set the start time
and press ‘
o confirm
(the ‘Start time’ is the
same for all days)
GO
’
GO
’
GO
’ t
-
Set by area:
Define the area size of the zone connected to the Base Station and the start time, at
which you wish Robomow to start mowing; Robomow will determine the most efficient
weekly program to your lawn based on the area given. Follow the screens and the
instructions below (figure 2.3) to set weekly program by area:
29
