Entry points on/off – Allows user not to use the entry points. When setting the
‘Entry points’
to
‘off’
the mower will always start the mowing the inner area from the Base Station.
Figure 2.8
Entry points
Set entry points
Entry points on/off
Set Zone: Base
Set Zone: A
Set Zone: B
Weekly program
Entry points
Skip next start
Islands
Work time
External base
2.1.1
2.1.2
2.1.1.1
2.1.1.2
2.1.1.3
2.1.1.4
2.1.1.5
2.1.1.6
When using weekly program by area or by days, the entry points are used in a cyclic mode i.e.
Robomow will start at a different entry point every operation, in a cyclic mode.
When using the advanced weekly program, the user has the option to set any entry point he wants
per day.
Notes:
1. It is not necessary to set all 4 points, if you find that 2 or 3 points are enough to your
lawn, you can stop the mower at any time during the process.
2. There is no need to wait until the mower will complete the drive back to the Base
Station; you can stop the mower at any time you want during the
‘Set entry points’
process by pressing the
‘STOP’
button.
3. Manual start - Upon pressing the
‘GO’
button for manual start, you will be asked to
select the entry point, if you have set them previously.
2.1.1.3 Skip next start
The
‘Skip next start’
option allows user to skip the next scheduled operation (figure 2.9).
Skip next on
Confirm
Skip next on
Confirm
Skip next on
Confirm
Figure 2.10
Skip next start
Figure 2.9
Set Zone: Base options
Set zone: Base
Set zone: A
Set zone: B
Weekly program
Entry points
Skip next start
Islands
Work time
External base
2.1.1
2.1.2
2.1.1.1
2.1.1.2
2.1.1.3
2.1.1.4
2.1.1.5
2.1.1.6
There are two options to activate this option:
1. Shortcut – when the mower is in the Base
Station press the ‘
STOP
’ key first to
display the right display (figure 2.10).
Then press ‘
GO
’ to confirm the skip.
2. Under ‘
Set Zone: Base’
menu scroll to
‘
Skip next start’
option and press ‘
GO
’ to set
the option (see figure 2.9).
After setting the ‘
Skip next start’
option to ‘
on
’ the mower will display the next start time after the
one skipped.
2.1.1.4 Island
Setting this option to
‘off’
allows the mower to acquire the Perimeter Wire immediately as starting
to search for the Base Station with no need to converge to the end of the lawn (figure 2.9).
2.1.1.5 Work time
Allows the user the option of setting the operating time from the ‘
MAX’
default setting to times
ranging from 15 minutes up to 2:00 hours (figure 2.11).
This menu is used when operating the mower in Manual Start from the Base Station, as when
the mower departes automatic from the Base Station, the
‘Work time’
it used is as defined in
the weekly program.
33
