37
EN
7.
Using The Power Box
7.1
Power Box Alerts
Event
Description
Docking Indicator is lit.
The mower is in its Base Station.
Operating Indicator is lit
The mower is not in its Base Station.
Program On/Off Indicator is
lit.
‘OFF’ will be displayed on the
mower.
Automatic Operation is paused.
Wire Indicator – Flashes and
Beeps
The Perimeter Wire is cut,
disconnected, or too long.
All Indicators flash
The mower did not return to the Base
Station after 4 hours of departure.
When the mower is detected at the
Base Station, alerts will turn Off.
All Indicators flash and Buzzer
sounds for 10 seconds.
The Anti-Theft option is set to On,
and the mower was removed from
its Base Station when it was not
scheduled to operate.
Note – To stop an alert when sounding, press the On/Off Button.
7.2
Turn the Buzzer On/Off
•
Press and hold the On/Off button for 10 seconds.
-
A short beep indicates
On
.
-
A flash indicates
Off
.
7.3
Enable/Disable the Automatic Operation
•
This option is used to disable (pause) a predefined Automatic Operation (Program) of Robomow. This
option does not prevent Manual Operation (Section 6.3).
•
Press and hold the
Program On/Off
button for 2 seconds.
A red LED will be lit on the Power Box. ‘OFF’ indication will be displayed on the mower:
o
If Robomow is currently in the process of mowing:
- Robomow will complete the current mowing cycle.
- After completing the current mowing cycle, Robomow will stay in the Base Station and will not start
another mowing cycle.
•
To Enable the Automatic Operation
o
Press and hold the Program On/Off button for 2 seconds.
o
Use P021 menu in Advanced Settings (see Section 6.4.2 for more details).
Docking Indicator
On/Off Button
Operating Indicator
Wire Indicator