5
EN
Transportation –
To safely move from or within the working area:
1.
Press the STOP button to stop Robomow
®
.
2.
Use the Remote Control (available as an accessory) to drive it from place to place.
3.
In case of different height level, switch off the Safety Switch, and carry the mower by the
carrying handle.
4.
In case of long transportation, use the original packaging.
5.
When transporting Robomow
®
over long distances switch off the Safety Switch.
IMPORTANT! After turning on the Safety Switch, always re-set the current day and
time. Failure to do so may result in non-intentional operation of the Robomow.
Using Remote Control (Manual Mowing)
1.
Mow only in daylight or in a good artificial light and avoid operating in wet grass.
2.
Do not operate Robomow
®
when barefoot or wearing open sandals. Always wear substantial footwear and
long trousers; always be sure of your footing on slopes.
3.
Use extreme caution when reversing the mower towards you.
4.
Always switch on the motor according to instructions with feet well away from the blade.
5.
Do not mow manually in slope greater than 15 degrees or where a firm footing is not possible.
Maintenance and Special Instructions–
1.
Always switch off the Safety Switch of Robomow
®
before clearing blockage/ checking/ cleaning/ working on
Robomow
®
or replacing the blade. Never attempt to service or adjust the mower while it is in operation.
2.
In case of abnormal vibrations, stop the mower, switch off the Safety Switch and check for any damage of the
blade. Replace worn or damaged blade to preserve balance. If vibration continues, call for service.
3.
Use heavy gloves when inspecting or servicing the blade.
4.
Do not perform maintenance when barefoot or wearing open sandals. Always wear suitable work shoes and long
trousers;
5.
Replace worn or damaged parts for safety.
6.
Use only the original equipment and accessories. It is not permitted to modify the original design of Robomow
®
.
All modifications are made at your own risk.
7.
Maintenance/ Servicing / Cleaning of Robomow
®
should be according to manufacturer’s instructions.
8.
Keep all nuts, bolts and screws tight to be sure the machine is in safe working condition.
9.
Warning! When there is a risk of a lightning storm, disconnect the Perimeter Wire from the Base Station / Perimeter
Switch and the Power Box 230V/120V plug from the power outlet.
Batteries
–
1.
Do not open or damage the battery pack.
2.
The battery pack should be replaced by a service dealer only.
3.
The Battery Pack contains electrolytes. In case of an electrolyte leakage from the battery pack, the actions
described below are required:
- Skin contact: Wash the contact areas off immediately with plenty of water and soap.
- Eye contact: Flush the eyes with plenty of clean water for at least 15 minutes immediately, without rubbing.
- Get medical treatment.
4.
Ensure that the battery pack is charged using the correct charger recommended by the manufacturer. Incorrect
use may result in electric shock, overheating or leakage of corrosive liquid from the battery.
Product End of Use -
1.
Robomow and its accessories should be collected separately at the end of their life to prevent waste electrical and
electronic equipment from ending up in landfill sites, to promote the reuse, treatment and recovery of electrical and
electronic equipment with the purpose to preserve, protect and improve the quality of the environment, protect human
health and utilize natural resources prudently and rationally.
2.
Do not dispose of Robomow or any other part of it (including the Power Box, Base Station and Perimeter Switch) as
unsorted municipal waste – it should be collected separately.
3.
Ask your local distributor/dealer about return and collection systems available.
4.
Do not dispose of the battery pack in a fire and do not place used batteries in your household trash.
5.
The battery must be collected, recycled, or disposed of in an environmentally sound manner.
