18
STOP
GO
STOP
GO
Operating Lamp
UP
arrow
DOWN
arrow
Rain
sensor
LCD display
window
GO / START
button
Main Switch
button
STOP button
Language
Press GO
00:00
dd/mm/yy
next digit
Time and Date
Press GO
English (US)
Confirm
Press ‘
GO
’
Scroll ‘UP’ or ‘DOWN’
to choose your language
and press GO to confirm
Press ‘
GO
’
Scroll to set the time and date
and press ‘
G
O’ for the next digit
(‘
STOP
’ is used to go back)
15:23 16/04/07
Confirm
Please note that there are
‘
English
’ and ‘
English (US)
’ under
the ‘
Language
’ menu, as the language
defines also the ‘Time and date’ format.
Press ‘
GO
’ to confirm and continue
with the instructions at the next
subparagraph (‘Wire position’ test)
Language
Press GO
Language
Press GO
00:00
dd/mm/yy
next digit
00:00
dd/mm/yy
next digit
Time and Date
Press GO
Time and Date
Press GO
English (US)
Confirm
English (US)
Confirm
English (US)
Confirm
Press ‘
GO
’
Scroll ‘UP’ or ‘DOWN’
to choose your language
and press GO to confirm
Press ‘
GO
’
Scroll to set the time and date
and press ‘
G
O’ for the next digit
(‘
STOP
’ is used to go back)
15:23 16/04/07
Confirm
Please note that there are
‘
English
’ and ‘
English (US)
’ under
the ‘
Language
’ menu, as the language
defines also the ‘Time and date’ format.
Press ‘
GO
’ to confirm and continue
with the instructions at the next
subparagraph (‘Wire position’ test)
Your Robomow is shipped with the batteries fuse removed and
it will not operate without it. The fuse is supplied in a small plastic bag
attached to the Robomow (located under the Bumper Cover).
Lift the Bumper Cover and insert the fuse. The fuse can be inserted in
either direction. See figure 1.22
Robomow will now power up (wake up). The Batteries are charged at the
factory and have plenty of power to perform the initial setup and test run.
However, after the initial set-up process is completed the batteries need
to be charged 16 hours in the Base Station before the first operation.
1.4.2 Robomow Settings
Control Panel
On the top of the rear side of Robomow there is a control panel. The control panel consists of a
display, keypad and operating lamp (figure 1.23).
The
‘GO’
button is used as a means to select or confirm different menu options or settings;
‘Up
/ Down
’
arrow keys will allow you to scroll through the menu items;
The
‘STOP’
button has two different functions: when pressing during automatic operation it will stop
Robomow and blade operation immediately and when pressing at any time during the menu selection
process it will bring you one step back in the menu.
‘Main Switch’
button is used to switch off the Robomow. It is required to switch off the Robomow
when carrying it between zones.
IMPORTANT INFORMATION!
Follow the instructions on the LCD display -
Robomow will friendly instruct you, step by step, how to complete the setup
Language, Time and Date settings
‘
Language
’ is the first setting you are asked to set, as Robomow wakes up. Follow the
instructions below, as shown in figure 1.24.
Figure 1.22 -
Inserting batteries fuse
Figure 1.23
Control Panel
Figure 1.24
Language, Time
and Date setting
