ROBOTAPE 50 CFA
3.6.1.DESCRIPTION OF THE TAPING
UNIT
The taping unit in question serves to
tape cardboard boxes of pre-defined
sizes.
For any information regarding the taping
unit, refer to the specific manual
attached to this publication.
Compared to the taping unit described,
the one installed on the machine has
some more components described
below.
1)
Sensors support plate.
2)
Lack of adhesive tape sensor (upper and
lower).
3)
Adhesive tape breakage/end sensor
(upper and lower).
4)
Slotted plate.
3.7. TECHNICAL SPECIFICATIONS
The figure and table specify the dimensional characteristics and technicaldata of the machine.
Description
ROBOTAPE 50 CFA
Infeed speed.
22 m/min
Net weight of standard machine (with 2 T50).
510 kg
Supply voltage (Standard).
400V 3Ph 50Hz + N + T
Installed power.
0,4 kW (0,6 kW
∗
)
Conveyor belts height (Standard).
50 mm
Conveyor belts height (Optional).
75 mm
Ambient operating temperature.
0÷40 °C
Protection grade.
Electrical system.
IP 54
Protection grade.
Electric motors.
IP 54
Operating pressure pneumatic system.
6±1 bar (0,6±1 MPa)
Air consumption per cycle (Pneumatic system).
8 Nl
Consumption air/min (Pneumatic system).
50 Nl/min
Taping unit for adhesive tape up to 50 mm with end section
50/70 mm (top/bottom or only top).
(
1
)
Taping unit for adhesive tape up to 50 mm with end section
30 mm (top/bottom or only top).
(
1
)
Taping unit for adhesive tape up to 75 mm with end section
50/70 mm (top/bottom or only top).
(
1
)
Min working height (mm) without/with wheels.
570/675
Max working height (mm) without/with wheels.
750/855
Boxes/minute (with mm W300xh300xL500 boxes).
8
(
1
)
Available
∗
With “motorized roller conveyor entrance” optional.
English
22/75
