77
INFORMATION ABOUT THE USE
ENG
6.2. DESCRIPTION OF THE CONTROLS
1)
Emergency stop button:
it is used in case of imminent risk to stop, with a voluntary action, the machine parts which may pose a risk.
For more details, see the paragraph “Description of safety
devices”.
2)
User interface:
it is used to set or modify the machine operating parameters.
For more details, see the paragraph “Description of user interface”.
3)
“Cycle start” button
:
it is used to start the wrapping automatic cycle.
4)
“Cycle stop” button
:
it is used to stop the wrapping automatic cycle.
5)
“Reset” button
:
it is used to reset the machine before restarting it after an emergency stop or after a shut-down due to the
disconnection of the power supply.
6)
Emergency override key-operated switch:
it is used to temporarily bypass the carriage emergency.
When the key is turned to position I
(hold to run), the user interface screen will display the page “safety device
override” and this allows, by pressing the button (
7), to lift only the carriage.
