ENG
INFORMATION ABOUT THE USE
86
6.5.1. MANUAL REINFORCEMENT FUNCTION
Important
This function cannot be performed with layered recipes.
When performing a standard recipe, during the carriage upstroke or downstroke, after having performed the wrapping
at the base of the pallet or at its upper end, it is possible to manually perform intermediate wrapping by pressing the
button (A) with two different modes:
-
Keep the button (A) pressed to stop the carriage performing reinforcement wrapping until the button is
released.
-
Repeatedly press the button (A) to make the carriage perform as many reinforcement wrapping turns as the
times the button has been pressed (
1÷9
turns).
Important
The button is visible only during the machine automatic operation.
