- 45 -
B
C
E
D
G
A
F
H
14C214041
English
- 45 -
6.1.
RECOMMENDATIONS FOR OPERATION AND
USE
‒
Before performing any operation, the operator must make sure
that he/she understood the “Instructions for use”.
‒
When using the machine for the first time, the operator must
read the manual and identify the controls and simulate some
operations, especially the start-up and shutdown.
‒
Check that all safety devices are installed correctly and in
good working order.
‒
Only implement the uses intended by the manufacturer and do
not tamper with any device to obtain performances different
from the intended ones.
6.2.
CONTROL DESCRIPTION
The illustration shows the main controls of the machine and the list
shows their description and function.
A) Emergency stop push-button
:
it is used to stop with a voluntary
action, in case of imminent risk,
the organs of the machine that
may pose a rick.
For further details consult the
paragraph “Description of safety
devices”.
B) User interface
: it is used to set or
modify the operating parameters
of the machine.
For further details consult the
paragraph “Description of the
user interface”.
C) “Start cycle” push-button
: it
is used to start the automatic
wrapping cycle.
D) “Stop cycle” button
: it is used to stop the automatic wrapping
cycle.
When pressed during the lowering of the trolley, a lowering operation
activated by the
key on the Home screen, it stops its travel.
E) “Reset” push-button
: it is used to reset the machine before
restarting after an emergency stop or to restart it after stopping
with power supply cut-off.
F) Key selector for emergency interruption
: it is used to momentarily
interrupt the emergency of the trolley.
Turn the key to the position I (JOG), the user interface shows the
page on “Safety interrupted” which allows, by pressing the push-
button
(G)
, to lift the trolley only.
H) Pedal control
: used to lower and raise the presser with gripper to
lock the top part of the product to be wrapped.
Chapter
6
ABOUT THE USE
