- 63 -
Rotoplat DW 108 - 508
Rotoplat DW-C 108 - 508
14C214043
Rotoplat DW 108 - 508
14C214044
Rotoplat DW-C 108 - 508
English
- 63 -
Chapter 6
ABOUT THE USE
6.17. WRAPPING CYCLES DESCRIPTION
Single wrapping cycle
To select a “single cycle” press the
(C1)
button and check that the relative
LED lights up.
The spool carriage starts from the
bottom of the pallet and stops at the
top after having accomplished the
preset number of rounds at the bottom
and top of the pallet.
If you press the “START” button again,
a second wrapping cycle is carried
out starting from the top and ending
at the base of the pallet
(see 6.7. “Wrapping cycle” screenshot).
Double wrapping cycle
To select the “double cycle” press key
(C2)
and check that corresponding
led lights up
The reel carriage moves off from the
bottom of the pallet and stops when it
gets to the top, and then comes back
down to the bottom of the pallet again,
wrapping the load twice in doing so.
(see 6.7. “Wrapping cycle” screenshot).
