SPIROR HP - DR
Allowed pressure
(max)
bar
10
Average air
consumption
Nl/min
20
The table below shows the technical specifications of the machine
(Spiror DR)
.
Description
Units
of
measur‑
ement
Value
Machine
Spiror DR 400
Spiror DR 600
Spiror DR 900
Supply voltage
230V 3Ph 50/60Hz (upon request)
400V 3Ph + N 50/60Hz
Installed power
kW
2,2/2,6
Absorption
A
12/13,5
Electrical system
protection
IP54
Rotating ring
speed (max)
rpm
220
180
130
Product infeed
speed (max)
m/min
80
60
50
Product infeed
speed (min)
m/min
20
16
10
Total weight
kg
700
800
900
Worktable height
mm
800
Operating
pressure
bar
6 ± 1
Allowed pressure
(max)
bar
10
Average air
consumption
Nl/min
20
3.7.1.PRODUCT SIZE
The dimensions (width and height or diameter) of the products’ cross sections workable on each machine must
remain within the respective diagrams; the same is to be said for the cross sections that are uniform on all the
product’s length.
For best results from a qualitative point of view, the rotating ring diameter must be the smallest possible,
compared to the product’s cross section.
For cross sections smaller than those indicated, contact the manufacturer.
For products that intersect the sketched areas, contact the manufacturer.
|
Important
The maximum indicated length is obtained by taking into account the lateral pneumatic guides.
For different guides, contact the Manufacturer.
|
Important
Lengths and workable cross sections in each type of machine must previously be defined with the
manufacturer.
The minimum working length is
800 mm
for the
HP
model and
1000 mm
for
DR
.
English
36/95
Summary of Contents for SPIROR DR
