Robot Coupe CL 52 Series "D", Manual

14

INTRODUCTION TO
YOUR NEW VEGETABLE
PREPARATION MACHINE 
CL 52

The CL 52 is perfectly geared to professional needs.
It can perform any number of tasks, which you will
gradually discover as you use it.

The CL 52 is equipped with a removable lid, metal
bowl an stainless steel motor base. The full moon
hopper is ideal for cutting large products.

The CL 52 is supplied with a wide range of discs
and grids to satisfy even the most demanding chefs
when it comes to cutting up fruit and vegetables, i.e. 
slicing, grating, julienne, dicing and french fried 
potatoes discs.

Thanks to its simple design, all components requi-
ring frequent handling for maintenance or cleaning
can be fitted and removed in a trice.

To make things easier for you, this manual gives a
breakdown of all the various fitting operations.

This manual contains important information 
designed to help the user get the most out of this 
vegetable preparation machine.

We therefore recommend that you read it carefully 
before using your machine.

We have also included a few examples to help you
get the feel of your new machine and appreciate its
numerous advantages.

ASSEMBLY

1) With the motor base
facing you, place the 
discharge plate on the
bottom of the bowl.

Emptying arm for fine grating and
slicing only (cabbage, celer y, 
carrots, cheese, etc.).
SIDE A facing upwards (ejection rib
downwards) for any vegetables or 
citrus fruit which require careful
handling (tomatoes, mushrooms...).
SIDE B facing upwards (ejection rib
upwards) for all other types of fruit or 
vegetables.

SWITCHING ON
THE MACHINE

Before plugging in, check that your power supply 
corresponds to that indicated on the machine’s
identification plate.

Switch on the empty machine, making sure that
the blade is rotating properly in an anti-clockwise 
direction.

On the motor base, a red arrow marks the blade 
rotation direction. If the blade turns in a clockwise 
direction, swap over two wires:

Since GREEN/YELLOW is the earth,

DO NOT DISCONNECT.

Swap either: 

the 

and the 

the and 

the 

the and 

the 

3

2

3

1

2

1

• CL 52 SINGLE-PHASE 

ROBOT-COUPE CL 52 are fitted with various types
of motors:  

230 V / 50 Hz / 1
115 V / 60 Hz / 1
220 V / 60 Hz / 1

The machine comes with a single-phase plug 
con-nected to a power cord.

• CL 52 THREE-PHASE 

ROBOT-COUPE CL 52 are fitted with various types
of motors:  

400 V / 50 Hz / 3
220 V / 60 Hz / 3
380 V / 60 Hz / 3

The machine is supplied with a cable to which you
simply attach the appropriate electrical plug for
your system. The cable has four wires, one earth
wire, plus three phase wires.

If you have a 4-pin plug:

1) Connect the green and yellow earth wire to the
earth pin.
2) Connect the three other wires to the remaining
pins.

If you have more than 4 pins

in the plug please

note the ROBOT-COUPE does not require a 

neutral

wire.

W A R N I N G

THIS MACHINE MUST BE EARTHED

(RISK OF ELECTROCUTION)