6
12/07/2018
• CONTROL PANEL
R 2 N / R 2 N Ultra / R 2 N CLR
Red knob
=
Off
switch
Green knob
=
On
switch
Black knob
=
Pulse
control
ASSEMBLY
• BOWL ATTACHMENT
1) With the motor base
facing you, place the
bowl onto the motor
base with the handle
toward the front. Turn
the bowl just off-center
and to the left as you
lower it onto the base.
2) Then, turn it back to
the right, (counterclo-
ckwise) locking it onto
the motor base tabs.
INTRODUCTION TO
YOUR NEW R 2 N •
R 2 N Ultra • R 2 N CLR
The R 2 N / R 2 N Ultra / R 2 N CLR is a versatile
machine designed to meet your professional needs.
It can perform a number of tasks, as well as save
much in time and labor.
This food processor consists of a bowl assembly
and a vegetable preparation attachment. The 3
liter bowl is used for chopping, grinding, pureeing,
blending, mixing, and kneading ingredients used in
most recipes.
A wide range of cutting discs are available for use
with the vegetable preparation attachment. Cutting
discs are available for slicing, waved slicing,
grating, pulping and julienne.
Its numerous functions will open the door to a whole
new culinary world.
Thanks to its simple design, all components
requiring frequent handling for maintenance or
cleaning can be easily assembled or removed.
All users should read this operation manual before
operating the machine.
SWITCHING
ON THE MACHINE
• ADVICE ON ELECTRICAL CONNECTIONS
Before plugging in, check that your power supply
corresponds to that indicated on the machine’s
serial number plate.
3) Place the blade onto
the motor shaft. Rotate
the blade until it drops
into place. The bottom
blade should be le-
vel with and just off the
bottom of the bowl.
4) Note the plastic tab
on the bowl lid. Place
the lid on the bowl with
the tab turned to the
front and slightly to the
left of the bowl handle;
then, turn the lid back to
the right until it comes to
a stop with the tab over
the bowl handle.
The device is now ready for use.
• VEGETABLE PREPARATION ATTACHMENT
The vegetable preparation attachment consists of
two main detachable parts: the vegetable prepara-
tion top and the vegetable preparation bowl.
1) With the motor
base facing you, fit the
vegetable preparation
bowl attachment onto
the motor base; the exit
chute should be at the
rear of the machine.
This appliance must be plugged into a grounded
socket (risk of electrocution).
W A R N I N G
Summary of Contents for R 2 N
