• CONTROL PANEL
R 301 Ultra
Red switch
= Off switch
Green switch
= On switch
Black switch
= Pulse control
R 300
Red switch
= Off switch
Green switch
= On switch
ASSEMBLY
• BOWL ATTACHMENT
1) With the motor base
facing you, place the
bowl onto the motor
base with the magnetic
bar/handle toward the
front. Turn the bowl just
off-center and to the left
as you lower it onto the
base.
2) Then, turn it back to
the right. The magnet
bar/handle should
come to a stop at the
front of the motor base.
The bowl, when prop-
erly assembled should
be just off and level with
the top surface of the
motor base.
6
INTRODUCTION TO YOUR NEW
R300/R301 Ultra SERIES “C”
The R 300/R 301 Ultra is a versatile machine
designed to meet your professional needs. It can
perform a number of tasks, as well as save much in
time and labor.
This food processor consists of a bowl assembly and
vegetable preparation attachment. The 3.5 quart
bowl is used for chopping, grinding, pureeing,
blending, mixing, and kneading of ingredients
required in most every recipe.
A wide range of cutting plates are available for use
with the vegetable preparation attachment. Cutting
plates are available for slicing, waved slicing,
grating, pulping, and julienne.
A citrus juicer accessory is also available.
Its numerous functions will open the door to a whole
new culinary world.
Thanks to its simple design, all components
requiring frequent handling for maintenance or
cleaning can be easily assembled or removed.
All users should read this operation manual before
operating the machine.
SWITCHING ON
THE MACHINE
• ADVICE ON ELECTRICAL CONNECTIONS
Before plugging in, check that your power supply
corresponds to that indicated on the machine’s
serial number plate.
3) Place the blade onto
the motor shaft. Rotate
the blade until it drops
into place. The bottom
blade should be level
with and just off the
bottom of the bowl.
4) Place the lid on the
bowl with the magnet
turned off-center and to
the left. Then, turn it
back to the right until it
stops over the magnet
bar/handle.
The device is now ready for use.
• CITRUS-JUICER ATTACHMENT
1) and 2) Operate the same way for the bowl
attachment.
3) Place the basket on the
bowl and rotate until it
clicks. You will notice that
the magnet of the basket
is directly above the mag-
netic bar/handle.
4) Place the cone onto
the motor shaft and it
should drop into place
just off the surface of the
basket.
This appliance must be plugged into an
earthed socket (risk of electrocution).
W A R N I N G