10
A
F
D
E
C
B
J
I
MAINTENANCE
• MOTOR SEAL
An examination should be made periodically to
assure that a seal against liquids is being
maintained around the motor shaft. The seal can
and should be replaced whenever wear or erosion
is noted or minimally once every three to six
months. It is recommended that the seal be replaced
by an authorized repair agency.
• BLADE AND CUTTING PLATES
Blades should be kept sharp. It is not necessary
to have a razor edge. However, they will need
sharpening periodically. Replacement of the dull
blades or plates is recommended.
• BOWL LOCKING WASHER
The bowl locking washer is located below the bowl
and holds the bowl in place. If it becomes worn, it
needs to be replaced.
TECHNICAL
SPECIFICATIONS
• WEIGHT (Lbs)
Net
Gross
R 401 Series A
(without disc)
28.7
35.3
R 402 Series A
(without disc)
35.3
41.9
R 402 V. Series A
(without disc)
33.1
39.7
• WORKING HEIGHT
We recommend that you position the food processor
on a stable worktop so that the upper edge of the
large feed hopper is at a height of between 47 and
51 inches.
• NOISE LEVEL
The equivalent continuous sound level when the
food processor is operating on no-load is less than
70 dB (A).
SAFETY
The R 401 Series A - R 402 Series A - R 402 V.
Series A are fitted with magnetic safety devices.
W A R N I N G
R E M E M B E R
When you open the bowl lid, the motor stops. To
restart the machine, simply close the lid and press
the green switch.
When you open the lever of the vegetable
preparation attachment, the motor stops. When you
close the lever, the machine restarts.
To avoid splashing when running liquids in the
bowl, allow the blades to come to a complete stop
before opening the lid.
The R 401 Series A - R 402 Series A are
equipped with a
thermal protector
which automati-
cally stops the motor if the machine is overloaded.
If this happens, let the machine cool completely
before restarting. The thermal protector will reset
automatically.
The R 402 V. Series A is equipped with a
manually
resetable overloaded circuit-breaker.
If the machi-
ne is overloaded, the breaker will trip. If this occurs,
allow the machine to cool completely, then reset the
breaker located on the motor base.
The blades and cutting plates are extremely
sharp. Handle with care.
Never try to override or defeat the purpose of,
the locking and safety systems.
Never put nonfood objects into the machine
openings.
Only use the food pushers to force the food into
the machine.
Do not overload the appliance.
Never leave the machine running unattended.
• DIMENSIONS (in inches)
R 402 - R 402 V.
Series A
A
8 ¾
B
12
¾
C
9
¾
D
23 ¼
E
12 ½
F
29 ½
Cutter - R 401
R 402 - R 402 V.
Series A
I
9
¾
J
9 ½
R 401
Series A
A
8
¾
B
12
¾
C
9
¾
D
22 ½
E
12 ½
F
28 ¾
