5
EN
G
LI
SH
IMPORTANT WARNING
WARNING: In order to limit accidents such as electric shocks, personal injury or fire, and in order to limit material damage due to
misuse of the appliance, please read these instructions carefully and follow them strictly. Reading the operating instructions will
help you know your appliance and enable you to use the equipment correctly. The operation manual should be kept within easy
access to all users for reference and should be read completely by all first time users of the machine.
UNPACKING
• Carefully remove the equipment from the packa-
ging and take out all the boxes or packets contai-
ning attachments or specific items.
• WARNING: some of the parts are very sharp e.
g. blade, plates … etc.
INSTALLATION
• We recommend you install your machine on a
stable solid base at a comfortable working height.
• Machine must be operated and stored in a location
not subject to water drips or spray or explosive
vapors.
CONNECTION
• Always check that your power supply corres-
ponds to that indicated on the serial number plate
and that it is properly sized.
• Always connect the machine to a grounded outlet
with GFCI (ground fault circuit interrupt) protection.
HANDLING
• Always wear cut-resistant gloves when handling
the cutting plates.
ASSEMBLY PROCEDURES
• Follow the various assembly procedures carefully
(see page 6) and make sure that all the attachments
are correctly positioned.
USE
• The machine must not be modified in any way
from its original configuration.
• Operating times of 5 minutes or longer can
cause processed food to increase to temperatures
above 125° F (52° C).
• Do not open the feed lead / attachment until the
motor has come to a complete stop.
• Never tamper with or defeat the purpose of the
locking and safety systems.
• Never put a hand or nonfood object in the entry
or exit chutes.
• Do not overload the machine.
CLEANING
• Always unplug your appliance before cleaning.
• Always clean the appliance and attachments at
the end of each use.
• Never place the motor unit in water.
• For parts made of aluminum alloys, use clea-
ning detergents suitable for aluminum.
• For plastic parts, do not use detergents that are
too alkaline (i.e., containing too much caustic soda
or ammonia…).
MAINTENANCE
• Always unplug the appliance before servicing.
• Check the seals regularly and ensure that the
safety devices are in good working order.
• It is particularly important to maintain and
check the attachments since certain products
contain corrosive agents e.g. citric acid.
• NOTICE: Never operate the appliance if the
power cord or plug has been damaged. If the
machine fails to operate as described in this
manual, or if the machine malfunctions in any
way, remove the machine from use and have it
serviced. Additionally, discard all food processed
at the time of the malfunction.
•Contact your local Authorized Service Agency if
something appears to be wrong.
W A R N I N G
KEEP THESE INSTRUCTIONS
IN A SAFE PLACE
