background image

26

R 402 three-phase machine

R 402 V.V. single-phase machine

- Power shown on data plate.

R 402 single-phase machine

    Safety

the R 401, R 402 and R 402 V.V. are fitted with a 
magnetic safety device and motor braking system.

As soon as you open the cutter lid, the motor stops.
To restart the machine, simply close the lid and 
press the green switch.
The motor stops as soon as the veg prep machine’s 
lever or lid is opened and starts up again as soon 
as they are closed. If the lever is left open for more 
than 40 seconds before being closed, simply press 
the green button to start the machine.
In order to avoid splash when processing liquid 
preparation in the cutter bowl, we recommend you 
to stop the machine before opening the lid.
The R 401, R 402 (single-phase and three-phase) 
and R 402 V.V. are fitted with a 

thermal cut-out

 

which automatically stops the motor if the machine 
is left on for too long or overloaded.
If this happens, allow the machine to cool 
completely before restarting.

• DimenSionS (in mm)

• WoRKinG HeiGHt

We recommend that you position the food processor 
on a stable worktop so that the upper edge of the 
large feed hopper is at a height of between 1.20 m 
and 1.30 m

• noiSe LeVeL

The equivalent continuous sound level when the 
food processor is operating on no-load is less than 
70 dB (A).

• eLeCtRiCaL Data

R 401 single-phase machine

the blades and discs are extremely sharp. 

Handle with care.

     

W a R n i n G

Motor

Speed 

(Rpm)

Intensity 

(Amp.)

230 V/50Hz

1,500

5.7

120 V/60Hz

1,800

12.0

220 V/60Hz

1,800

5.7

Moteur

Vegetable 

Attachment 

Speed (Rpm)

Cutter  

speed 

(Rpm)

Intensity 

(Amp.)

230 V/50Hz

500

1,500

5.4

120 V/60Hz

600

1,800

9

220 V/60Hz

600

1,800

5.4

Moteur

Vegetable 

Attachment 

Speed (Rpm)

Cutter  

speed 

(Rpm)

Intensity 

(Amp.)

230 V / 

50-60 Hz

300  

to  

1,000

300 

to  

3,500

10

Moteur

Vegetable 

Attachment 

Speed (Rpm)

Cutter  

speed 

(Rpm)

Intensity 

(Amp.)

230 V/50Hz

750

2.3

1,500

2.8

400 V/50Hz

750

1.3

1,500

1.6

220 V/60Hz

900

2.3

1,800

3.0

380 V/60Hz

900

1.3

1,800

1.6

A

B

C

D

H

i

E

F

G

R 401

R 402 

R 402 V.V.

204

224

571

591

C

723

743

534

534

294

294

f

239

239

G

220

220

H

410

410

i

534

534

Summary of Contents for R 402































Reviews: