Robot Coupe R 402, User Manual

Eng

21

     INTrODuCTION TO yOur  

NEW r 401 • r 402 •  
r 402 V.V. BOWL CuTTEr/  
VEGETaBLE PrEParaTION 
aTTaCHmENT

The food processor is perfectly geared to 
professional needs. It can perform any number of 
tasks, which you will gradually discover as you use 
it.
The food processor consists of a bowl cutter and 
vegetable preparation attachment. In cutter mode, 
it can be used to process meat, vegetables, fine 
stuffing, mousse, grinding, kneading,… in less 
than 5 minutes for even the longest tasks. In the 
vegetable preparation version, the device has a 
wide range of discs for thin slicing, grating and 
julienne vegetables. The R 402/R 402 V.V. allows 
more functions : dicing and French fries.
Its numerous functions will open the door to a whole 
new culinary world.
Thanks to its simple design, all components 
requiring frequent handling for maintenance or 
cleaning can be fitted and removed in a trice
This manual contains important information 
designed to help the user get the most out of his 
or her R 401/R 402/R 402 V.V. bowl cutter/
vegetable preparation device.

We therefore recommend that you read it 
carefully before using your machine.

We have also included a few examples to help you 
get the feel of your new machine and appreciate its 
numerous advantages.

     sWITCHING  ON 

THE maCHINE

• aDVICE ON ELECTrICaL CONNECTIONs

Before plugging in, check that your power supply  
corresponds to that indicated on the machine’s 
identification plate.

GrEEN / yELLOW is the earth, 

DO NOT DIsCONNECT

Swap either : 

 the 

➊

 and the 

➋

 the 

➊

 and the 

➌

 the 

➋

 and the 

➌

single Phase r 401

The single phase R 401 is fitted with various types 
of motors: 

230 V / 50 Hz /1

120 V / 60 Hz /1

220 V / 60 Hz /1

The machine comes with a single phase plug 
connected to a power cord.

single Phase r 402

The single phase R 402 is fitted with various types 
of motors:  

230 V / 50 Hz /1

240 V / 50 Hz /1

120 V / 60 Hz /1

220 V / 60 Hz /1

The machine comes with a single phase plug 
connected to a power cord.

single phase r 402 V.V. (Variable speed)

The R 402 V.V. is available with a single phase 
motor + variable speed: 230 V / 50 - 60 Hz /1
The standardized plug must be calibrated to a  
minimum of 10 amps and preferably 16 amps, if 
the appliance is used intensively.

• CONTrOL PaNEL

r 401

Red switch 

=  

Off switch

Green switch 

= 

 On switch

Black switch 

=  

Pulse control

Three phase r 402 

The R 402 comes with different types of motor:

400 V / 50 Hz /3
220 V / 60 Hz /3
380 V / 60 Hz /3

This machine is supplied with a cable to which you 

simply attach the appropriate electrical plug or 

isolator for your system. The cable has four wires, 

one earth wire, plus three phase wires.

If you have a 4-pin plug :

1)  Connect the green and yellow earth wire to the 

earth pin.

2)  Connect the three other wires to the remaining 

pins.

If you have more than 4 pins in the plug,

 please 

note the ROBOT-COUPE does not require a 

neutral

wire.

switch on the empty machine, making sure that  

the blade is rotating properly in an anti-clockwise 

direction.

On the motor unit, a red arrow marks the blade 

rotation direction.
If the blade turns in a clokwise direction, swap over 

two wires.

W a r N I N G

THIs aPPLIaNCE musT BE PLuGGED INTO 

aN EarTHED sOCkET (rIsk OF ELECTrOCuTION).