background image

R100B Operation Manual

2

INTRODUCTION

The Robot Coupe commercial food processor performs
a host of culinary feats.  It is designed for high speed
and quality vegetable processing.  The Robot Coupe

slices, juliennes, and shreds

 with the continuous feed

attachment, plus it will 

chop, grind, puree, mix, or knead

using the cutter bowl attachment.

This operators manual is broken down into sections
giving you detailed instructions for assembly and op-
eration of the continuous feed attachment and the cut-
ter bowl attachment.  Close attention should be paid to
all instructions in this manual to ensure a long life utili-
zation of your food processor.

This manual should be kept within easy
access to all users for reference, and
should be read completely by all first time
users of the machine.

Maintaining the food processor in good working condi-
tion is one of the most important measures to be taken.
Inspect the machine and all parts regularly to make
sure they are in good working condition.

DO NOT operate a machine that has mal-
functioned in any way.

Discard any food processed at the time of
a malfunction

 and have the machine inspected and

repaired at one of the Robot Coupe Authorized Ser-
vice Agencies, a list is provided in the back of this
manual.  Contact one of these service agencies for all
of your service, parts and accessory requirements.

CAUTION:  Your Robot Coupe comes with
a sharp cutting “S” blade and cutting
plates.  Always handle with safety in mind.
We suggest that a pair of cut-resistant
gloves be worn when handling the “S”
blade and plates.

Machine Specifications:

The Model 

R100B

 is equipped with a high speed mo-

tor generating 1/2 Hp which plugs into a standard 120
volt/ 60 Hz, 15 amp power outlet.  The full load amper-
age rating is 7 amps.  The machine is supplied with a
2.5 liter plastic bowl attachment, clear plastic cover,
and a cutting “S” blade.  Push type on/off buttons are
supplied.  The 

R100BCLR

 is the same as the R100B,

but has a clear bowl.

I.

INTRODUCTION

II.

ASSEMBLY, GENERAL USE OF
THE CUTTER BOWL

III.

OPERATING INSTRUCTIONS

V.

TROUBLE SHOOTING
PREVENTIVE MAINTENANCE AIDS
CLEANING

VI.

SERVICE INFORMATION/SERVICE
AGENCY LIST

Summary of Contents for R100B














Reviews: