background image

24

4) Make sure that the scraper 
arm is correctly assembled 
with the lid and the handle 
locked.

5) Place the lid on the bowl 
and rotate it to the right until 
it locks. 

With everything in place, 
your appliance is ready to 
run.

     USES & EXAMPLES

•  For liquids, never fill the bowl more than ² / ³ or less 

than 2 cm below the upper part of the blade.

•  Your Robot Cook

®

 is designed to carry out the 

following functions:

    ASSEMBLY

1) With the motor unit facing 
you, make sure that the bowl 
handle is slightly to the left. 

2) Turn the bowl handle to the 
right until the motor lugs are 
securely positioned in their 
sockets. The handle should 
now be straight in front of you. 

3) Position the blade on the 
motor shaft and lower it right 
to the bottom of the bowl. 
Make sure that it is correctly 
positioned, by rotating it in 
the bowl.  

  I M P O R T A N T

Never put your ingredients in the bowl before 

the blade is in place.

W A R N I N G

As a precaution, always  unplug your appliance 

before cleaning it (hazard of electrocution) and 

handle the blades with care (hazard of injury).

    HYGIENE

IMPORTANT: NEVER USE PURE BLEACH 

 

Correctly dilute the detergent / disinfectant 
following the manufacturer instructions which are 
generally printed on the packaging.

- Scrub well if required.
- Let the detergent act. 
- Rinse carefully.
- Dry thoroughly with a disposable cloth. 

    CLEANING

• MOTOR BASE

Never immerse the motor base in water. Clean 
using a damp cloth or sponge.

• BOWL

- Remove the lid
-  Release the bowl by rotating it on the motor unit to 

unlock it. 

-  Gently lift it up to disengage it, leaving the blade 

in the bowl in order to prevent any spillage if the 

preparation is liquid.

If the food has a solid consistency, remove the blade 

and empty the bowl of its contents.
You can also remove any mixture stuck to the blade 

by running it in the emptied bowl of your Robot 

Cook

®

.

Your bowl can be washed in the dish-washer.

T

Emulsify

D

Grind

Mix

Chop

Blend

Knead

Summary of Contents for Robot Cook



















Reviews: