background image

Robot-Coupe 

SNC

 - 12 avenue du Maréchal Leclerc – BP 134 – 71305 Montceau-les-Mines Cedex - France

Robot-Coupe 

SNC

:  

-  EN 12100 -1 & 2 - 2004: Safety of machinery – General 

principles for design,

-  EN 60204-1 -2006: Safety of machinery – Electrical 

equipment of machines,

- EN 12852: Food Processors and Blenders,
- EN 1678-1998: Vegetable Cutting Machines,
- EN 454: Blender-Mixers,
-  

EN 12853: Hand-held Blenders and Whisks (stick 
blenders), 

- EN 14655: Bread Slicers,
- EN 13208: Vegetable Preparation Machines,
- EN 13621: Salad Spinners,
- EN 60529-2000: Degrees of protection,

- IP 55 for the electrical controls, 
- IP 34 for the machines. 

D

eclares that the machines identified by their type above, 

comply with:

•  The essential requirements of the following European 

directives and with the corresponding national 
regulations:
- Directive «Machinery» 2006/42/EC,
- Directive «Low voltage» 2006/95/EC,
-  Directive «Electromagnetic compatibility»  

2004/108/EC,

- Regulation (EC) n°1935/2004 «Materials and articles 
intended to come into contact with food»,
- Regulation (EU) n°10/2011 «Plastic materials and 
articles intended to come into contact with food»,
-  Directive «Reduction of Hazardous Substances (RoHS) 

2002/95/EC,

- Directive «WEEE» 2002/96/EC,

•  The requirements of the European harmonized standards 

and with the standards specifying the hygiene and 
safety requirements:

DECLARATION OF CONFORMITY

Signed in Montceau en Bourgogne on 19 Febuary 2013

Alain NODET
Industrial Director

Summary of Contents for Robot Cook



















Reviews: