Robot Coupe Robot Cook, Manual

20

     YOU HAVE JUST ACQUIRED A 

Robot Cook

®

The Robot Cook

®

 is a Cutter-Emulsifier-Heater 

perfectly adapted to the needs of professionals.
It will be of great service to you which you will 

gradually discover as you use it.
The Advantages of Robot Cook

®

:

- Cutter function with a bottom bowl blade.
- Maximum liquid capacity of 2.5 litres.
- Precise temperature control of 1° or 2° C.
- Heating capacity up to 140° C.
- Programming function for 9 recipes.
Your Robot Cook

®

 is equipped with the following 

accessories:
- 3.7 litre stainless steel bowl.
- Micro-serrated stainless steel blades.
- Lid and bowl scraper arm.

     SWITCHING  ON 

THE MACHINE

• ADVICE ON ELECTRICAL CONNECTIONS

Before plugging in, check that your power supply 

corresponds to that indicated on the machine’s 

identification plate. 

- Power supply:

The general power supply is turned 

off by the black switch located at 

the back of the machine.

• SETTINGS:

Switches:

Heat:     

Low heat  

.

High heat 

.

Speed:   
Timer:    
Allow you to respectively choose temperature (°C), 

speed (rpm) and time (min).
The rotary dial is designed to regulate the chosen 

parameter (temperature, speed, time). 

For example:

 after pressing the speed button, you 

regulate the speed using the rotary dial; the chosen 

speed is displayed on the speed line.

- Settings:

The small arrow shows the parameter 

where the rotary dial is active. 

1. Low and high heat function: 

2 possibilities:

Adjustable temperature from 20°C - 140°C.
Low heat (small flame):      
High heat (big flame):   
You press the heat switch 

 once to select low heat. 

Then use the rotary dial to select the desired 

temperature.

Press twice on the heat switch 

 to select high heat. 

Then use the rotary dial to select the desired 

temperature (big flame displayed).

W A R N I N G

THIS APPLIANCE MUST BE PLUGGED INTO 

AN EARTHED SOCkET (RISk OF ELECTROCUTION).

Robot Cook

®

This model is adapted to 

220-240V / 50-60Hz

The standardized plug must be calibrated to a 

minimum of 10 amps, and preferably 16 amps, if 

the appliance is used intensively.

• CONTROL PANEL

ON/OFF  

(behind the machine)

CONTROL PANEL

SETTINGS

PROGRAMMING

Pulse Switch 

Low and High Heat Function
Speed Function
Timer Function  

Programme Function
Step Button 

Rotary Dial  

(parameter setting)

Run Switch 

Stop Switch