Robot Coupe Robot Cook, Manual

21

The desired temperature is displayed opposite the 
chosen arrow 

.

The temperature is the temperature measured in the 
bowl 

.

The power or heat temperature can be adjusted 
during operations.

If you do not wish to use the heat function, select the 
2 dashes (—— °C) on the heat line.

2. Speed Functions: 
• Speed variator from 80 to 3,500 rpm.

Once you have pressed the speed switch, the rotary 
dial will allow you to choose the desired speed.

Functions

Speeds

Blend 

100 to 500 rpm or 

R-Mix -100 to -500 rpm

Cut

600 to 2,000 rpm

Mix

2,100 to 3,000 rpm

Emulsify

3,000 to 3,500 rpm

• The R-Mix function 

(blend function: the blade turns 

in the opposite direction so as not to cut the food) 
can be accessed between –100 rpm and –500 rpm.

To obtain this, you need to turn the rotary dial to 
minus (–). If the motor is running, it will stop when 
reaching 0 rpm. You will need to restart the machine 
once the speed has been chosen.

• Intermittent Speed Function: 

the blade rotates a 

few times every 2 seconds.

Black switch 

Turbo Pulse

Green switch 

Run

Red switch 

Stop

o obtain this, you need to turn the rotary dial to 
minus (–) until you reach the display 

. 

Benefit:

 This function maintains the temperature of 

the preparation-in-progress without changing the 
texture. It also prevents the motor from overheating 
on low speed if the bowl is very full.

• Turbo Function: 

This function will enable you to reach a speed of 
4,500 rpm. To obtain this, you need to press on the 
Turbo/Pulse switch for the required run time.

The Turbo function

 can only be used when the 

machine is already running. 

• Pulse Function: 

The high-precision pulse function gives you better 
control over processing. Turn the button to adjust the 
pulse speed. 
You can only use 

the pulse function

 from standstill.

3. Timer Function: 
1 - Countdown Mode 

By pressing the switch 

, you will set the run 

time of the appliance with the rotary dial. 
At the end of the run time, a short bell will ring 
by default.
You can choose to activate the long bell option 

 to set a long ring alert by pressing twice on  

the Timer button 

. 

2 - Timer Mode

A timer records the run time of the appliance by 
default.

3 - Differed Mode  

By pressing 2 seconds on the Timer switch 

,

Pressing 2 seconds on the Red Stop switch will reset 
the settings to the initial configuration. (connect the 
appliance).

• PROGRAMMING: 

+

- Use a programme:

Go to the Programme function 

, choose the 

programme number using the rotary dial.
Turn on your appliance to the chosen programme.

the following display appears on your screen  . 
You will set the desired run time of the appliance 
using the rotary dial once the chosen temperature 
is reached.
This mode will automatically deactivate after use 
and the indicator   will disappear.

Benefit

: This mode enables you to activate the 

Timer only once the chosen cooking temperature 
is reached. You can thus program the cooking 
time independently of the start temperature and 
of the quantity of food. 

• OPERATIONS:

The Pulse, Run and Stop switches send instructions to 
the machine. They are present on all ROBOT-COUPE 
appliances.
They will carry out what appears on the display 
panel. (What has been « programmed »).