2
Surface
1. If you have selected the Surface only or Peri-
meter and Surface options, you have to con-
figure the Surface tab.
2. The
Tool Speed (A)
and the
Spacing (B)
are
respectively preseted at 60 mm/s and 30 mm but
you can set your own parameters in function of
your objectives.
3. End path on: determines the last point in which
the finishing tool will end its trajectory. It can end
on:
i. Point 4
ii. Point 3
iii. Spacing best fit: in this case, the Path
generator algorithm will determine the
number of passes necessary to keep the
space as close as possible to the setted
Spacing value (B)
. With this option, the
path will end on Point 2 or 4.
4. Add circular weaving: this option enable the fin-
ishing tool to do circular weaving during the pro-
grammed trajectory. The
speed
,
radius
and
margin
values are default settings and you can
adjust them in function of the desired finishing
result.
55
