Robur GAHP-AR, Installation, Use And Maintenance Manual

Warnings

6

III

Routine maintenance

Proper maintenance assures the efficiency and good op-

eration of the appliance over time.

„

Maintenance must be performed according to the man-

ufacturer's instructions (see Chapter 7 

p.  36) and in 

compliance with current regulations.

„

Appliance maintenance and repairs may only be entrust-

ed to firms legally authorised to work on gas appliances 

and systems.

„

Enter into a maintenance contract with an authorised 

specialised firm for routine maintenance and for servic-

ing in case of need.

„

Use only original parts.

Decommissioning and disposal

If the appliance is to be disposed of, contact the manu-

facturer for its disposal.

Keep the Manual

This Installation, use and maintenance manual must al-

ways accompany the appliance and must be handed to 

the new owner or installer in the event of sale or removal.

III.2 

 CONFORMITY

The installation of the appliance must conform to the require-

ments of the authority having jurisdiction or, in the absence of 

such requirements, to the latest edition of the 

National Fuel 

Gas Code, ANSI Z223.1

. If the unit is installed in Canada, the 

installation must conform to the 

Canadian Gas Association 

Standard CAN1 B149.1 and .2

.

The appliance’s electrical connections and grounding must be 

in accordance with the latest edition of the 

National Electrical 

Codes, ANSI/NFPA No. 70 (CSA Standard C22.1 when in-

stalled in Canada)

 and with any local codes. To ensure the elec-

trical safety of this appliance, it must be correctly connected to 

an efficient grounding system.  The manufacturer is not respon-

sible for any damages caused by the failure of the grounding 

system.

Other applicable provisions and standards

The design, installation, operation and maintenance of the sys-

tems shall be carried out in compliance with current applicable 

regulations, depending on the  Country and location, and in 

accordance with the manufacturer's instructions. In particular, 

regulations regarding the following shall be complied with:

▶

Gas systems and equipment.

▶

Electrical systems and equipment.

▶

Heating and cooling systems, heat pumps and chillers.

▶

Environmental protection and combustion products ex-

haust.

▶

Fire safety and prevention.

▶

Any other applicable law, standard and regulation.

III.3 

   EXCLUSIONS OF LIABILITY AND 

WARRANTY

Any contractual or extra-contractual liability of the 

manufacturer for any damage caused by incorrect in-

stallation and/or improper use and/or failure to comply 

with regulations and with the manufacturer's directions/

instructions shall be disclaimed.

The manufacturer cannot be held responsible for any 

damages to persons, animals or goods due to improper, 

erroneous or irrational installation of these appliances.

In particular, the warranty on the appliance may be ren-

dered void by the following conditions:

„

Incorrect installation.

„

Misuse.

„

Failure to comply with the manufacturer's indications on 

installation, use and maintenance.

„

Alteration or modification of the product or any part 

thereof.

„

Extreme operational conditions or however outside of 

the operational ranges set forth by the manufacturer.

„

Damages caused by external agents such as salts, chlo-

rine, sulphur or other chemical substances contained in 

the installation water or present in the air of the instal-

lation site.

„

Abnormal actions transmitted to the appliance by the 

plant or installation  (mechanical stresses, pressure, vi-

brations, thermal expansion, electrical surges...).

„

Accidental damages or due to force majeure.