DATA LOGGING DESCRIPTION
MAN-1111 Rev H
©Copyright 2015 LSI-Robway Pty Ltd
Page 121
Type 3 Over-ride key switch is operated.
A data log is created every time the over-ride key switch is operated. This data-log records crane data at the
time that the over-ride key switch is operated.
Accessing the Data Logger
The operator can use two more Function codes for accessing the information stored in the data logger.
These Function codes are used for:
•
Downloading the data logger records to a PC or to an SD card fitted to the RCI-4100 controller SD
card holder.
•
Erasing the content of the data logger
Downloading Data Logger (Overview)
Downloading of data logger records can be performed at any time using the in-built SD card holder or by
connecting a cable between the RCI-4100 and a standard PC or laptop and selecting the "Download Logger
Contents" Function code.
Downloading using SD Card
See “
Detailed Instructions to Download Data Log using SD Card.
” below.
Downloading using a cable
The download can also be performed as an ASCII file transfer and the Hyper-Terminal program is normally
used to receive the information from the RCI-4100. For further details contact LSI-Robway.
Data Format
Data is downloaded and saved as a log file and can be opened with any word processing program.
Downloaded file name is normally xxxxx_nnnnnn.log where xxxxx is the last 5 digits of the software (WA
number), and nnnnnn is the date (ddmmyy) the log was downloaded. Note that this date comes from the
internal RCI-4100 clock. The log can also be imported into MSExcel for easier viewing. Each record will be
printed in chronological order followed by the lift counter. If no records have been stored only a summary is
shown.
A header is at the top of the data log:
DOWNLOAD PERFORMED
(date time)
This line records the date and time when the download was performed.
After the last data log the following appears:
>END OF LIST<
Percentages Changed
(date time)
Lift Counter %
Main
Aux
20% to
40% SWL
x
x
40% to
65% SWL
x
x
65% to
90% SWL
x
x
Note
: x = Actual number of lifts recorded.
•
“>END OF LIST<” appears after the data log and confirms that all data logs have been downloaded.
•
“Percentages Changed” shows the date and time when the percentage values for the counters
and/or the logging percentage were last changed. The default date displayed is 01/01/2007. If the
percentages are changed, this date and time will be stored. This date and time will be maintained
until the values are once again altered or calibration data is cleared.
•
“Lift Counter %” “Main” “Aux” are headers for the following entries:
•
“20% to 40%” “40% to 65%” “65% to 90%” lines give a count of the total number of lifts recorded in
the specified regions of SWL %. There are separate columns for Main and Auxiliary. The
percentages shown in this table can be changed in Function codes (causing the date in the second
line to change as previously mentioned).
Summary of Contents for RCI-4100
